HATCH / Fills an enclosed area or selected objects with a hatch pattern, solid fill, or gradient fill

`H`

All hotkeys for AutoCAD

Toggle General Features Cycle isometric planes	`Ctrl` + `E`
Toggle General Features Toggle Grid	`Ctrl` + `G`
Toggle General Features Toggle running object snaps	`Ctrl` + `F`
Toggle General Features Toggle Pick Style	`Ctrl` + `H`
Toggle General Features Toggle Hide pallets	`Ctrl` + `↑ Shift` + `H`
Toggle General Features Toggle Coords	`Ctrl` + `I`
Toggle General Features Toggle Infer Constraints	`Ctrl` + `↑ Shift` + `I`
Manage Screen Clean Screen	`Ctrl` + `0`
Manage Screen Property Palette	`Ctrl` + `1`
Manage Screen Design Center Palette	`Ctrl` + `2`
Manage Screen Tool Palette	`Ctrl` + `3`
Manage Screen Sheet Set Palette	`Ctrl` + `4`
Manage Screen DBConnect Manager	`Ctrl` + `6`
Manage Screen Markup Set Manager Palette	`Ctrl` + `7`
Manage Screen Quick Calc	`Ctrl` + `8`
Manage Screen Command Line	`Ctrl` + `9`
Manage Drawings New Drawing	`Ctrl` + `N`
Manage Drawings Save drawing	`Ctrl` + `S`
Manage Drawings Open drawing	`Ctrl` + `O`
Manage Drawings Plot dialog box	`Ctrl` + `P`
Manage Drawings Switch to next	`Ctrl` + `⭾ Tab`
Manage Drawings Switch to previous drawing	`Ctrl` + `↑ Shift` + `⭾ Tab`
Manage Drawings Switch to previous tab in current drawing	`Ctrl` + `Page Up`
Manage Drawings Switch to next tab in current drawing	`Ctrl` + `Page Down`
Manage Drawings Exit	`Ctrl` + `Q`
Manage Drawings Select all objects	`Ctrl` + `A`
Toggle Drawing Modes Display Help	`F1`
Toggle Drawing Modes Toggle text screen	`F2`
Toggle Drawing Modes Toggle object snap mode	`F3`
Toggle Drawing Modes Toggle 3DOsnap	`F4`
Toggle Drawing Modes Toggle Isoplane	`F5`
Toggle Drawing Modes Toggle Dynamic UCS	`F6`
Toggle Drawing Modes Toggle grid mode	`F7`
Toggle Drawing Modes Toggle ortho mode	`F8`
Toggle Drawing Modes Toggle snap mode	`F9`
Toggle Drawing Modes Toggle polar mode	`F10`
Toggle Drawing Modes Toggle object snap tracking	`F11`
Toggle Drawing Modes Toggle dynamic input mode	`F12`
Manage Workflow Copy object	`Ctrl` + `C`
Manage Workflow Cut object	`Ctrl` + `X`
Manage Workflow Paste object	`Ctrl` + `V`
Manage Workflow Copy to clipboard with base point	`Ctrl` + `↑ Shift` + `C`
Manage Workflow Paste data as block	`Ctrl` + `↑ Shift` + `V`
Manage Workflow Undo last action	`Ctrl` + `Z`
Manage Workflow Redo last action	`Ctrl` + `Y`
Manage Workflow Cancel current command	`Ctrl` + `[`
Manage Workflow Cancel current command	`Ctrl` + `\`
Manage Workflow Cancel current command	`Esc`
</p><p>A, B, C ARC / Creates an arc*	`A`
</p><p>A, B, C ADCENTER / Manages and inserts content such as blocks, xrefs, and hatch patterns*	`A` then `D` then `C`
</p><p>A, B, C AREA / Calculates the area and perimeter of objects or of defined areas*	`A` then `A`
</p><p>A, B, C ALIGN / Aligns objects with other objects in 2D and 3D*	`A` then `L`
</p><p>A, B, C APPLOAD / Load Application*	`A` then `P`
</p><p>A, B, C ARRAY / Creates multiple copies of objects in a pattern*	`A` then `R`
</p><p>A, B, C ACTRECORD / Starts the Action Recorder*	`A` then `R` then `R`
</p><p>A, B, C ACTUSERMESSAGE / Inserts a user message into an action macro*	`A` then `R` then `M`
</p><p>A, B, C ACTUSERINPUT / Pauses for user input in an action macro*	`A` then `R` then `U`
</p><p>A, B, C ACTSTOP / Stops the Action Recorder and provides the option of saving the recorded actions to an action macro file*	`A` then `R` then `S`
</p><p>A, B, C ATTIPEDIT / Changes the textual content of an attribute within a block*	`A` then `T` then `I`
</p><p>A, B, C ATTDEF / Redefines a block and updates associated attributes*	`A` then `T` then `T`
</p><p>A, B, C ATTEDIT / Changes attribute information in a block*	`A` then `T` then `E`
</p><p>A, B, C BLOCK / Creates a block definition from selected objects*	`B`
</p><p>A, B, C BCLOSE / Closes the Block Editor*	`B` then `C`
</p><p>A, B, C BEDIT / Opens the block definition in the Block Editor*	`B` then `E`
</p><p>A, B, C HATCH / Fills an enclosed area or selected objects with a hatch pattern, solid fill, or gradient fill*	`B` then `H`
</p><p>A, B, C BOUNDARY / Creates a region or a polyline from an enclosed area*	`B` then `O`
</p><p>A, B, C BREAK / Breaks the selected object between two points*	`B` then `R`
</p><p>A, B, C BSAVE / Saves the current block definition*	`B` then `S`
</p><p>A, B, C BVSTATE / Creates, sets, or deletes a visibility state in a dynamic block*	`B` then `V` then `S`
</p><p>A, B, C CAMERA / Sets a camera and target location to create and save a 3D perspective view of objects*	`C` then `A` then `M`
</p><p>A, B, C CONSTRAINTBAR / A toolbar-like UI element that displays the available geometric constraints on an object*	`C` then `B` then `A` then `R`
</p><p>A, B, C PROPERTIES / Controls properties of existing objects*	`C` then `H`
</p><p>A, B, C CHAMFER / Bevels the edges of objects*	`C` then `H` then `A`
</p><p>A, B, C CHECKSTANDARDS / Checks the current drawing for standards violations*	`C` then `H` then `K`
</p><p>A, B, C COMMANDLINE / Displays the Command Line window*	`C` then `L` then `I`
</p><p>A, B, C COLOR / Sets the color for new objects*	`C` then `O` then `L`
</p><p>A, B, C COPY / Copies objects a specified distance in a specified direction*	`C` then `O`
</p><p>A, B, C CTABLESTYLE / Sets the name of the current table style*	`C` then `T`
</p><p>A, B, C NAVVCUBE / Controls the visibility and display properties of the ViewCube tool*	`C` then `U` then `B` then `E`
</p><p>A, B, C CYLINDER / Creates a 3D solid cylinder*	`C` then `Y` then `L`
D, E, F DIMSTYLE / Creates and modifies dimension styles	`D`
D, E, F DIMANGULAR / Creates an angular dimension	`D` then `A` then `N`
D, E, F DIMARC / Creates an arc length dimension	`D` then `A` then `R`
D, E, F DIMBASELINE / Creates a linear, angular, or ordinate dimension from the baseline of the previous or selected dimension	`D` then `B` then `A`
D, E, F DBCONNECT / Provides an interface to external database tables	`D` then `B` then `C`
D, E, F DIMCENTER / Creates the center mark or the centerlines of circles and arcs	`D` then `C` then `E`
D, E, F DIMCONTINUE / Creates a dimension that starts from an extension line of a previously created dimension	`D` then `C` then `O`
D, E, F DIMCONSTRAINT / Applies dimensional constraints to selected objects or points on objects	`D` then `C` then `O` then `N`
D, E, F DIMDISASSOCIATE / Removes associativity from selected dimensions	`D` then `D` then `A`
D, E, F DIMDIAMETER / Creates a diameter dimension for a circle or an arc	`D` then `D` then `I`
D, E, F DIMEDIT / Edits dimension text and extension lines	`D` then `E` then `D`
D, E, F DIST / Measures the distance and angle between two points	`D` then `I`
D, E, F DIVIDE / Creates evenly spaced point objects or blocks along the length or perimeter of an object	`D` then `I` then `V`
D, E, F DIMJOGLINE / Adds or removes a jog line on a linear or aligned dimension	`D` then `J` then `L`
D, E, F DIMJOGGED / Creates jogged dimensions for circles and arcs	`D` then `J` then `O`
D, E, F DATALINK / The Data Link dialog box is displayed	`D` then `L`
D, E, F DATALINKUPDATE / Updates data to or from an established external data link	`D` then `L` then `U`
D, E, F DONUT / Creates a filled circle or a wide ring	`D` then `O`
D, E, F DIMORDINATE / Creates ordinate dimensions	`D` then `O` then `R`
D, E, F DIMOVERRIDE / Controls overrides of system variables used in selected dimensions	`D` then `O` then `V`
D, E, F DRAWORDER / Changes the draw order of images and other objects	`D` then `R`
D, E, F DIMRADIUS / Creates a radius dimension for a circle or an arc	`D` then `R` then `A`
D, E, F DIMREASSOCIATE / Associates or re-associates selected dimensions to objects or points on objects	`D` then `R` then `E`
D, E, F DRAWINGRECOVERY / Displays a list of drawing files that can be recovered after a program or system failure	`D` then `R` then `M`
D, E, F DSETTINGS / Sets grid and snap, polar and object snap tracking, object snap modes, Dynamic Input, and Quick Properties	`D` then `S`
D, E, F TEXT / Creates a single-line text object	`D` then `T`
D, E, F DVIEW / Defines parallel projection or perspective views by using a camera and target	`D` then `V`
D, E, F DATAEXTRACTION / Extracts drawing data and merges data from an external source to a data extraction table or external file	`D` then `X`
D, E, F ERASE / Removes objects from a drawing	`E`
D, E, F DDEDIT / Edits single-line text, dimension text, attribute definitions, and feature control frames	`E` then `D`
D, E, F ELLIPSE / Creates an ellipse or an elliptical arc	`E` then `L`
D, E, F EXPORTPDF / Exports drawing to PDF	`E` then `P` then `D` then `F`
D, E, F EXTERNALREFERENCES / Opens the External References palette	`E` then `R`
D, E, F EXTEND / Extends objects to meet the edges of other objects	`E` then `X`
D, E, F QUIT / Exits the program	`E` then `X` then `I` then `T`
D, E, F EXPORT / Saves the objects in a drawing to a different file format	`E` then `X` then `P`
D, E, F EXTRUDE / Extends the dimensions of a 2D object or 3D face into 3D space	`E` then `X` then `T`
D, E, F FILLET / Rounds and fillets the edges of objects	`F`
D, E, F FILTER / Creates a list of requirements that an object must meet to be included in a selection set	`F` then `I`
D, E, F FSMODE / Creates a selection set of all objects that touch the selected object	`F` then `S`
D, E, F FLATSHOT / Creates a 2D representation of all 3D objects based on the current view	`F` then `S` then `H` then `O` then `T`
G, H, I GROUP / Creates and manages saved sets of objects called groups	`G`
G, H, I GEOCONSTRAINT / Applies or persists geometric relationships between objects or points on objects	`G` then `C` then `O` then `N`
G, H, I GRADIENT / Fills an enclosed area or selected objects with a gradient fill	`G` then `D`
G, H, I GEOGRAPHICLOCATION / Specifies the geographic location information for a drawing file	`G` then `E` then `O`
G, H, I HATCH / Fills an enclosed area or selected objects with a hatch pattern, solid fill, or gradient fill	`H`
G, H, I HATCHEDIT / Modifies an existing hatch or fill	`H` then `E`
G, H, I HIDE / Regenerates a 3D wireframe model with hidden lines suppressed	`H` then `I`
G, H, I INSERT / Inserts a block or drawing into the current drawing	`I`
G, H, I IMAGEADJUST / Controls the image display of the brightness, contrast, and fade values of images	`I` then `A` then `D`
G, H, I IMAGEATTACH / Inserts a reference to an image file	`I` then `A` then `T`
G, H, I IMAGECLIP / Crops the display of a selected image to a specified boundary	`I` then `C` then `L`
G, H, I ID / Displays the UCS coordinate values of a specified location	`I` then `D`
G, H, I IMAGE / Displays the External References palette	`I` then `M`
G, H, I IMPORT / Imports files of different formats into the current drawing	`I` then `M` then `P`
G, H, I INTERSECT / Creates a 3D solid, surface, or 2D region from overlapping solids, surfaces, or regions	`I` then `N`
G, H, I INTERFERE / Creates a temporary 3D solid from the interferences between two sets of selected 3D solids	`I` then `N` then `F`
G, H, I INSERTOBJ / Inserts a linked or embedded object	`I` then `O`
J, K, L JOIN / Joins similar objects to form a single, unbroken object	`J`
J, K, L DIMJOGGED / Creates jogged dimensions for circles and arcs	`J` then `O` then `G`
J, K, L LINE / Creates straight line segments	`L`
J, K, L LAYER / Manages layers and layer properties	`L` then `A`
J, K, L LAYERSTATE / Saves, restores, and manages named layer states	`L` then `A` then `S`
J, K, L QLEADER / Creates a leader and leader annotation	`L` then `E`
J, K, L LENGTHEN / Changes the length of objects and the included angle of arcs	`L` then `E` then `N`
J, K, L MESHSMOOTHLESS / Decreases the level of smoothness for mesh objects by one level	`L` then `E` then `S` then `S`
J, K, L LIST / Displays property data for selected objects	`L` then `I`
J, K, L LAYOUT / Creates and modifies drawing layout tabs	`L` then `O`
J, K, L LINETYPE / Loads, sets, and modifies linetypes	`L` then `T`
J, K, L LTSCALE / Changes the scale factor of linetypes for all objects in a drawing	`L` then `T` then `S`
J, K, L LWEIGHT / Sets the current lineweight, lineweight display options, and lineweight units	`L` then `W`
M, N, O MOVE / Moves objects a specified distance in a specified direction	`M`
M, N, O MATCHPROP / Applies the properties of a selected object to other objects	`M` then `A`
M, N, O MATERIALS / Shows or hides the Materials window	`M` then `A` then `T`
M, N, O MEASURE / Joins similar objects to form a single, unbroken object	`M` then `E`
M, N, O MEASUREGEOM / Measures the distance, radius, angle, area, and volume of selected objects or sequence of points	`M` then `E` then `A`
M, N, O MIRROR / Creates a mirrored copy of selected objects	`M` then `I`
M, N, O MLINE / Creates multiple parallel lines	`M` then `L`
M, N, O MLEADERALIGN / Aligns and spaces selected multileader objects	`M` then `L` then `A`
M, N, O MLEADERCOLLECT / Organizes selected multileaders that contain blocks into rows or columns, and displays the result with a single leader	`M` then `L` then `C`
M, N, O MLEADER / Creates a multileader object	`M` then `L` then `D`
M, N, O MLEADEREDIT / Adds leader lines to, or removes leader lines from, a multileader object	`M` then `L` then `E`
M, N, O MLEADERSTYLE / Creates and modifies multileader styles	`M` then `L` then `S`
M, N, O PROPERTIES / Controls properties of existing objects	`M` then `O`
M, N, O MESHSMOOTHMORE / Increases the level of smoothness for mesh objects by one level	`M` then `O` then `R` then `E`
M, N, O MSPACE / Switches from paper space to a model space viewport	`M` then `S`
M, N, O MARKUP / Opens the Markup Set Manager	`M` then `S` then `M`
M, N, O MTEXT / Creates a multiline text object	`M` then `T`
M, N, O MVIEW / Creates and controls layout viewports	`M` then `V`
M, N, O GEOGRAPHICLOCATION / Specifies the geographic location information for a drawing file	`N` then `O` then `R` then `T` then `H`
M, N, O NEWSHOT / Creates a named view with motion that is played back when viewed with ShowMotion	`N` then `S` then `H` then `O` then `T`
M, N, O NEWVIEW / Creates a named view with no motion	`N` then `V` then `I` then `E` then `W`
M, N, O OFFSET / Creates concentric circles, parallel lines, and parallel curves	`O`
M, N, O OPTIONS / Customizes the program settings	`OBJECTSELECTION` + `LIMIT`
M, N, O SURFOFFSET/ Creates a parallel surface or solid by setting an offset distance from a surface	`OFFSETSRF`
M, N, O OPTIONS / Customizes the program settings	`OP`
M, N, O SURFOFFSET / Creates a parallel surface or solid by setting an offset distance from a surface	`OPENPROJECT`
M, N, O 3DORBIT / Rotates the view in 3D space, but constrained to horizontal and vertical orbit only	`O` then `R` then `B` then `I` then `T`
M, N, O OSNAP / Sets running object snap modes	`O` then `S`
P, Q, R PAN / Adds a parameter with grips to a dynamic block definition	`P`
P, Q, R PASTESPEC / Pastes objects from the Clipboard into the current drawing and controls the format of the data	`P` then `A`
P, Q, R PARAMETERS / Controls the associative parameters used in the drawing	`P` then `A` then `R`
P, Q, R BPARAMETER / Adds a parameter with grips to a dynamic block definition	`P` then `A` then `R` then `A` then `M`
P, Q, R SURFPATCH / Creates a new surface by fitting a cap over a surface edge that forms a closed loop	`P` then `A` then `T` then `C` then `H`
P, Q, R POINTCLOUD / Provides options to create and attach point cloud files	`P` then `C`
P, Q, R POINTCLOUDATTACH / Inserts an indexed point cloud file into the current drawing	`P` then `C` then `A` then `T` then `T` then `A` then `C` then `H`
P, Q, R POINTCLOUDINDEX / Creates an indexed point cloud (PCG or ISD) file from a scan file	`P` then `C` then `I` then `N` then `D` then `E` then `X`
P, Q, R PEDIT / Edits polylines and 3D polygon meshes	`P` then `E`
P, Q, R PLINE / Creates a 2D polyline	`P` then `L`
P, Q, R POINT / Creates a point object	`P` then `O`
P, Q, R HIDEPALETTES / Hides currently displayed palettes (including the command line)	`P` then `O` then `F` then `F`
P, Q, R POLYGON / Creates an equilateral closed polyline	`P` then `O` then `L`
P, Q, R SHOWPALETTES / Restores the display of hidden palettes	`P` then `O` then `N`
P, Q, R PROPERTIES / Displays Properties palette	`P` then `R`
P, Q, R PREVIEW / Displays the drawing as it will be plotted	`P` then `R` then `E`
P, Q, R PLOT / Plots a drawing to a plotter, printer, or file	`PRINT`
P, Q, R PSPACE / Switches from a model space viewport to paper space	`P` then `S`
P, Q, R POLYSOLID / Creates a 3D wall-like polysolid	`P` then `S` then `O` then `L` then `I` then `D`
P, Q, R PUBLISHTOWEB / Creates HTML pages that include images of selected drawings	`P` then `T` then `W`
P, Q, R PURGE / Removes unused items, such as block definitions and layers, from the drawing	`P` then `U`
P, Q, R PYRAMID / Creates a 3D solid pyramid	`P` then `Y` then `R`
P, Q, R QUICKCALC / Opens the QuickCalc calculator	`Q` then `C`
P, Q, R QUICKCUI / Displays the Customize User Interface Editor in a collapsed state	`Q` then `C` then `U` then `I`
P, Q, R QUICKPROPERTIES / Displays open drawings and layouts in a drawing in preview images	`Q` then `P`
P, Q, R QSAVE / Saves the current drawing	`Q` then `S` then `A` then `V` then `E`
P, Q, R QVDRAWING / Displays open drawings and layouts in a drawing using preview images	`Q` then `V` then `D`
P, Q, R QVDRAWINGCLOSE / Closes preview images of open drawings and layouts in a drawing	`Q` then `V` then `D` then `C`
P, Q, R QVLAYOUT / Displays preview images of model space and layouts in a drawing	`Q` then `V` then `L`
P, Q, R QVLAYOUTCLOSE / Closes preview images of model space and layouts in the current drawing	`Q` then `V` then `L` then `C`
P, Q, R REDRAW / Refreshes the display in the current viewport	`R`
P, Q, R REDRAWALL / Refreshes the display in all viewports	`R` then `A`
P, Q, R RENDERCROP / Renders a specified rectangular area, called a crop window, within a viewport	`R` then `C`
P, Q, R REGEN / Regenerates the entire drawing from the current viewport	`R` then `E`
P, Q, R REGENALL / Regenerates the drawing and refreshes all viewports	`R` then `E` then `A`
P, Q, R RECTANG / Creates a rectangular polyline	`R` then `E` then `C`
P, Q, R REGION / Converts an object that encloses an area into a region object	`R` then `E` then `G`
P, Q, R RENAME / Changes the names assigned to items such as layers and dimension styles	`R` then `E` then `N`
P, Q, R REVOLVE / Creates a 3D solid or surface by sweeping a 2D object around an axis	`R` then `E` then `V`
P, Q, R ROTATE / Rotates objects around a base point	`R` then `O`
P, Q, R RENDERPRESETS / Specifies render presets, reusable rendering parameters, for rendering an image	`R` then `P`
P, Q, R RPREF / Displays or hides the Advanced Render Settings palette for access to advanced rendering settings	`R` then `P` then `R`
P, Q, R RENDER / Creates a photorealistic or realistically shaded image of a 3D solid or surface model	`R` then `R`
P, Q, R RENDERWIN / Displays the Render window without starting a rendering operation	`R` then `W`
S, T, U STRETCH / Stretches objects crossed by a selection window or polygon	`S`
S, T, U SCALE / Enlarges or reduces selected objects, keeping the proportions of the object the same after scaling	`S` then `C`
S, T, U SCALESCRIPT / Executes a sequence of commands from a script file	`S` then `C` then `R`
S, T, U SECTION / Uses the intersection of a plane and solids, surfaces, or mesh to create a region	`S` then `E` then `C`
S, T, U SETVAR / Lists or changes the values of system variables	`S` then `E` then `T`
S, T, U SHADEMODE / Starts the VSCURRENT command	`S` then `H` then `A`
S, T, U SLICE / Creates new 3D solids and surfaces by slicing, or dividing, existing objects	`S` then `L`
S, T, U SNAP / Restricts cursor movement to specified intervals	`S` then `N`
S, T, U SOLID / Creates solid-filled triangles and quadrilaterals	`S` then `O`
S, T, U SPELL / Checks spelling in a drawing	`S` then `P`
S, T, U SPLINEDIT / Edits a spline or spline-fit polyline	`S` then `P` then `E`
S, T, U SPLINE / Creates a smooth curve that passes through or near specified points	`S` then `P` then `L`
S, T, U SECTIONPLANE / Creates a section object that acts as a cutting plane through 3D objects	`S` then `P` then `L` then `A` then `N` then `E`
S, T, U SEQUENCEPLAY / Plays named views in one category	`S` then `P` then `L` then `A` then `Y`
S, T, U MESHSPLIT / Splits a mesh face into two faces	`S` then `P` then `L` then `I` then `T`
S, T, U SHEETSET / Opens the Sheet Set Manager	`S` then `S` then `M`
S, T, U STYLE / Creates, modifies, or specifies text styles	`S` then `T`
S, T, U STANDARDS / Manages the association of standards files with drawings	`S` then `T` then `A`
S, T, U SUBTRACT / Combines selected 3D solids, surfaces, or 2D regions by subtraction	`S` then `U`
S, T, U MTEXT / Creates a multiline text object	`T`
S, T, U TABLET / Calibrates, configures, and turns on and off an attached digitizing tablet	`T` then `A`
S, T, U RABLE / Creates an empty table object	`T` then `B`
S, T, U TEXTEDIT / Edits a dimensional constraint, dimension, or text object	`T` then `E` then `D` then `I` then `T`
S, T, U THICKNESS / Sets the default 3D thickness property when creating 2D geometric objects	`T` then `H`
S, T, U TILEMODE / Controls whether paper space can be accessed	`T` then `I`
S, T, U TOOLBAR / Displays, hides, and customizes toolbars	`T` then `O`
S, T, U TOLERANCE / Creates geometric tolerances contained in a feature control frame	`T` then `O` then `L`
S, T, U TORUS / Creates a donut-shaped 3D solid	`T` then `O` then `R`
S, T, U TOOLPALETTES / Opens the Tool Palettes window	`T` then `P`
S, T, U TRIM / Trims objects to meet the edges of other objects	`T` then `R`
S, T, U TABLESTYLE / Creates, modifies, or specifies table styles	`T` then `S`
S, T, U UCSMAN / Manages defined user coordinate systems	`U` then `C`
S, T, U UNITS / Controls coordinate and angle display formats and precision	`U` then `N`
S, T, U UNISOLATEOBJECTS / Displays objects previously hidden with the ISOLATEOBJECTS or HIDEOBJECTS command	`UNHIDE`
S, T, U UNISOLATEOBJECTS / Displays objects previously hidden with the ISOLATEOBJECTS or HIDEOBJECTS command	`UNISOLATE`
S, T, U UNION / Unions two solid or two region objects	`U` then `N` then `I`
V, W, X VIEW / Saves and restores named views, camera views, layout views, and preset views	`V`
V, W, X VIEWGO / Restores a named view	`V` then `G` then `O`
V, W, X DDVPOINT / Sets the 3D viewing direction	`V` then `P`
V, W, X VIEWPLAY / Plays the animation associated to a named view	`V` then `P` then `L` then `A` then `Y`
V, W, X VSCURRENT / Sets the visual style in the current viewport	`V` then `S`
V, W, X VISUALSTYLES / Creates and modifies visual styles and applies a visual style to a viewport	`V` then `S` then `M`
V, W, X WBLOCK / Writes objects or a block to a new drawing file	`W`
V, W, X WEDGE / Creates a 3D solid wedge	`W` then `E`
V, W, X NAVSWHEEL / Displays a wheel that contains a collection of view navigation tools	`W` then `H` then `E` then `E` then `L`
V, W, X EXPLODE / Breaks a compound object into its component objects	`X`
V, W, X XATTACH / Inserts a DWG file as an external reference (xref)	`X` then `A`
V, W, X XBIND / Binds one or more definitions of named objects in an xref to the current drawing	`X` then `B`
V, W, X XCLIP / Crops the display of a selected external reference or block reference to a specified boundary	`X` then `C`
V, W, X XLINE / Creates a line of infinite length	`X` then `L`
V, W, X XREF / Starts the EXTERNALREFERENCES command	`X` then `R`
Y - Z ZOOM / Increases or decreases the magnification of the view in the current viewport	`Z`
Y - Z ANALYSISZEBRA / Projects stripes onto a 3D model to analyze surface continuity	`Z` then `E` then `B` then `R` then `A`
Y - Z ETRANSMIT / Creates a Self-Extracting or Zipped Transmittal Package	`Z` then `I` then `P`